null Skip to Content

Corbel Installation Instructions

  • Corbel Corbel
  • Wood
for Blocking Wood for Blocking
  • Screw Gun/
Drill Driver
& Bits Screw Gun/ Drill Driver & Bits
  • Caulk Gun Caulk Gun
  • Loctite® PL® Premium® 3X Construction Adhesive Loctite® PL® Premium® 3X Construction Adhesive
  • Color Complimenting Caulk or Wood Filler Color Complimenting Caulk or Wood Filler
  • Deck
Screws Deck Screws
  • Saw Saw
  • Tape Measure Tape Measure
  • Touchup Kit Touchup Kit
  • Small Paint Brush Small Paint Brush
  • Clean Cloth Clean Cloth
  • Safety Glasses Safety Glasses
WARNINGS:
  • Be sure to obey all safety rules and recommendations set forth by tool manufacturers.
  • Wear safety glasses during the entire installation process.
  • Always comply with clearances set forth by the manufacturer of stoves, fireplaces, furnaces, and any other heat source.


Click Here for Care and Maintenance info.

Directions

Measure the inside dimensions of the corbel.

Step 1

Measure the inside dimensions of the corbel.

Cut a block of wood (not supplied) to fit the inside dimension of the corbel.

Step 2

Cut a block of wood (not supplied) to fit the inside dimension of the corbel.

Install the block of wood where you want the corbel to go.

Step 3

Install the block of wood where you want the corbel to go.

Apply PL premium construction adhesive on the edges of the corbels.

Step 4

Apply PL premium construction adhesive on the edges of the corbels.

Install Corbel

Step 5

Install Corbel

Place corbel over the mounting block and slightly countersink at least one screw per side through the corbel and into the block of wood.

Step 5 (Continued)

Install Corbel

Quickly wipe away any excess adhesive.

Fill in the screw holes with the colored caulk or colored wood filler and use paint from the touch-up kit to further conceal holes.

Step 6

Fill in the screw holes with the colored caulk or colored wood filler and use paint from the touch-up kit to further conceal holes.